WIP330

Here are settings to use as a starting point to set up your own phone. The settings listed below use the most common ports but your own SIP provider may use different ones.

Most SIP problems are due to wrongly configured routers.

If you suffer from drop outs or any other SIP issues always upgrade to the latest firmware. This solves most problems.

These settings are from firmware version wip330_v1_03_18S.bin

SIP Settings

SIP : Your SIP ID
SIP Proxy: 5060
Registrar Address: your SIP server
Registrar Port: 5060
Expiry Time: 3600
Session Timer: 0
Display Name: Your SIP ID or Name (try both)
SIP Format: Normal
STUN: Disable (unless told otherwise)
STUN Address: Your SIP STUN server
STUN Port: 10000 (unless told otherwise)

Outbound Proxy: your SIP server
Outbound Proxy Port: 5060

Registrar Name: Your SIP ID
Password: Your SIP password


-------------------------------------





SDP Settings
Payload G7.11u, G711a,G729
Packet Time - Small
DTMF Relay - Disable (try turning this on to allow tones to be sent from the keypad)
UDP Port 5060
RTP Port 5004

SIP Settings

SDP Settings

-------------------------------------
Quality of Service

SIP TOS: blank
RTP TOS: blank

-------------------------------------

Quality of Service